Seat Heights
This Sargent World Sport seat fits both the R1200GS and Adventure models
The Sargent World Sport Rider's Seat for the R1200GS is available in two seat heights:
The Regular Version, which is comparable to the OEM high seat, and the Low Version, for improved reach to the ground.
| |
STANDARD |
LOW |
| STOCK OEM |
33.00" - 33.80" |
32.30" |
| SARGENT |
33.00" - 33.80" |
32.00" - 32.80" |
Seat heights for the ADVENTURE model differ slightly from the GS.
All measurements were taken on the Driver's Seat of a 2007 Adventure with 11,000 miles, hard cases and preload set halfway between maximum and minimum.
STOCK OEM
Adventure
Seat |
Low Position
34.5" |
High Position
35.125" |
STANDARD
SARGENT
WS-546 |
Low Position
33.375" |
High Position
34.25" |
LOW
SARGENT
WS-556 |
Low Position
32.625" |
High Position
33.375" |
Add-On Heat for Sargent seats
The heat is provided by a special unobtrusive fine gauge wire element which does not compromise comfort.
The Add-On heat package of Control and Installation Kit includes a built in relay and in-line fuse for safety, and is installed "switched" so there is no danger of battery drain when the bike is turned off.
Each heated seating area (front or rear) is supplied with its own heat Control.
Each heated zone draws approximately 2 amps (or 24 watts), and dual zone installations will draw approximately 4 amps (or 48 watts) at full power.
Our new "Advanced Comfort Control" offers maximum comfort, delivering a fully variable range of heat from Off to Full Power and anywhere in between.
Unlike competitive products which are just simple on or off bi-metallic thermostats that are affected by ambient temperatures, our Control supplies a full range of consistent heat delivery in all weather conditions.
The Control is completely waterproof and can be conveniently mounted within view using the enclosed Velcro strips.
The adjustable power and brightness settings are displayed in a LED bar graph that shows the exact heat setting, and is visible day or night.
Note - Prices start with just the Rider seat, then select the options you require
