UK's Best Selection of Adventure Motorcycle Travel Clothing, Equipment and Accessories

KAOKO™ Cruise Control

Kaoko Throttle Stabilizer kits are an essential product for every rider. The kit consists of a simple, ingenious and robustly designed friction nut that is integral with a special Kaoko handle bar [Read more ...]



£89.99





Product code: Kaoko

Manufacturers code: KA-CCF

Brand: Kaoko


Kaoko Throttle Stabilizer kits are an essential product for every rider. The kit consists of a simple, ingenious and robustly designed friction nut that is integral with a special Kaoko handle bar end weight. The Kaoko bar end weight is closely matched in appearance and weight to the Original Equipment Manufacturer’s (OEM) end weight.

It is operated by gripping the throttle stabilizer between your small finger and the palm of your hand and rotating as you normally would. To disengage the throttle stabilizer, whilst rolling off the throttle, grip the throttle stabilizer between your small finger and palm of your hand.

The main features of the Kaoko Throttle Stabilizers are ;-

• Greatly reduces rider fatigue and strain on hand and wrist.

• Whilst cruising, rider is able to remove hand from throttle grip, throttle opening will remain as set.

• Very simple to operate, even with heavy winter gloves. High quality, compact and durable design, super smooth action.

• Less wear and tear on throttle cables and linkages. Can result in reduced fuel consumption.

• Very little maintenance is required.

• Takes less than 5 minutes to fit.

Disclaimer - It is advised that the use of the Kaoko Throttle Stabilizer / Cruise Control is at the sole risk of the rider and by his/her decision to use it he/she does indemnify the manufacturers or organisers, their agents, employees and officers against any claim (including consequential loss) or action by them, their dependants or any other third party arising out of any loss, damage, injury or death suffered. Fitting should only be performed by a competent motorcycle mechanic and with full sight and comprehension of the enclosed fitting instructions.

OPTIONS

CCF400            Kaoko Throttle Stabilizer for BMW R1250GS '18-, R1200GS, R1200GS Adventure, R1200ST (pre 2008 models : 90mm central retaining bolt models)
                        (with or without OEM Handguards & with Touratech Handguards)


CCF400-08       Kaoko Throttle Stabilizer for BMW R1200GS, R1200GS Adventure, R1200ST (fits all models; but designed for 2008 - current models
                        with 80mm central retaining bolt): (with or without OEM Handguards & with Touratech Handguards)

CCF900            Kaoko Throttle Stabilizer for BMW F800GS & F650GS Twin 2008 -2012 (With Steel Back Bone OEM Hand guards with mounting bracket fitting in between barweight and throttlegrip); BMW R9T

CCF910            Kaoko Throttle Stabilizer for BMW F800GS (2013-) & F700GS (2013-) : (for use with OEM steel back bone hand guards)#

HNDVARAOXF   Kaoko Throttle Stabilizer for Honda XL1000V Varadero, XRV750 Africa Twin( for use with OEM grip or Oxford heated grips)

KBB310            Kaoko Throttle Stabilizer kit is designed to fit the Honda CRF1000L Africa Twin (With Barkbusters hand guards).

HND310           Kaoko Throttle Stabilizer for Honda Africa Twin CRF1000L incl DCT (’16-) (With OEM hand guards / without OEM hand guards)

HND31             Kaoko Throttle Stabilizer for Honda models with 19mm ID bars and 31mm OD bar weights; incl. F6B Goldwing (2013-), VFR800/Blackbird (2001-), CBR1100XX Blackbird, VTR1000 Firestorm (1998-2008),                                CBR650F (2015-), CTX700/N/ND/DCT (2013-)

TIG1050           Kaoko Throttle Stabilizer for the Triumph Tiger 1050 (all year models - with/ without OEM hand guards), (also fits with Barkbusters S1 or S7 hand guards)

TIG1200           Kaoko Throttle Stabilizer for the Triumph Tiger 1200 Explorer (2013-) (with OEM Hand guards).

TIGXC              Kaoko Throttle Stabilizer for the Triumph Tiger 800 and Tiger 800 XC (2011- with OEM hand guards only).

YAM620            Kaoko Throttle Stabilizer kit is designed to fit the Yamaha Tenere XT660Z (with OEM hand guards) (With Barkbusters hand guards).

VS1000UW-S          Kaoko Throttle Stabilizer kit is designed to fit the Suzuki DL650 V-Strom with OEM handguards and with / without OEM heated grips, DL1000 V-Strom with or without OEM handguards and with / without OEM heated grips (All year models).

 

 Verification Image

Reviews

07/11/2020
Rating:
Wasn't sure which model to get for my BMW F800GSA , however, after a quick e mail and I was told which lock I needed , I ordered it and despite not being a stock item it was with me within a week. The item is well finished and it took about 5 minutes to fit to the bike with the comprehensive instructions.It is a simple but ingenious design that works very well and is well worth the price
neil w