MOTOGRAFIX Tankpad Protector BMW R1200GS LC bwr

Production

All Motografix products are manufactured in house from the highest quality vinyl thermally printed and coated with a 3D gel layer which has excellent properties such as;

*UV stable - the tank pad / number board won’t fade even after repeated exposure to bright sunlight

*Design perfection - the resin coating is completely transparrent, therefore highlighting the colour matched design

*Ultimate protection - the coating repairs itself when scratched, therefore always having that new look

*Durable adhesion - the coating tapers at the edges, so forming an excellent seal against lifting of the pad during cleaning

Packaging

Products are shipped globally on a daily basis we know the importance of good quality packaging, this is why each product is individually blister packed / boxed for protection during transit which ensures the product lands safely.

Guarantee

Motografix offer a unique lifetime guarantee on colour and adhesion which gives you peace of mind when choosing Motografix to protect your pride and joy. 

Fitting Guide

Recommended application method for all Motografix products

Make sure the surface is clean and free of dust, oil, dirt, silicon and polish, we recommend you wash the area as usual and then rinse with plenty of clean water. The next step would be to thoroughly dry the area with a lint free cloth and once satisfied finish by dry wiping the area with methylated spirit or something similar to give the surface a good clean, degreased finish.

Adhesion works best when the product is around room temperature, the gentle use of a hair dryer will aid this process if your applying during colder winter months. Once warm and flexible remove from the backing while trying to avoid unnecessary adhesive contact with fingers as fingerprints can effect adhesion. Carefully position the part correctly to the surface of the bike smoothing out any air pockets as you apply, we suggest smoothing from the centre out to the edges for best results.