A range of motorcycle seat cushions that combine the latest air flotation technology with a superior build quality and a versatile attachment system.
WHAT IS A COMFORTAIR SEAT CUSHION?
Comfort [Read more ...]
A range of motorcycle seat cushions that combine the latest air flotation technology with a superior build quality and a versatile attachment system.
WHAT IS A COMFORTAIR SEAT CUSHION?
ComfortAir seat cushions are seat cushions that have been scientifically designed to evenly spread and dissipate the build up of pressure points resulting from sitting statically on a seat for a length of time. This air floatation technology was originally developed to help provide comfort for people who are wheelchair bound.
A strategically shaped and positioned network of interconnected air cells instantly shift pressure from one area of the seat to another, less pressurised area. Resulting in a cushion of air, comfortably supporting the entire contact between one's bottom and the seat.
WHY ARE THERE DIFFERENTLY SHAPED COMFORTAIR SEAT CUSHIONS?
The shape and position of the seat is different depending on the style of motorcycle one rides. A Sports bike's riding position result in more pressure applied to the front area of the seat, while a Cruiser's feet-forward riding position often exerts morepressure towards the rear of the seat. Hence the design of the four different ComfortAir seat cushions - each for a different style of motorcycle.
WHAT SEAT CUSHION IS BEST FOR MY TYPE OF MOTORCYCLE?
Use the table below to determine the seat cushion that could best suit your style of motorcycle. HOW DO YOU INSTALL A SEAT CUSHION ONTO A MOTORCYCLE?
Open the valve on the bladder and fully inflate by blowing into the valve until the cells appear full of air. Close the valve. Re-install the bladder into the cushion cover. Remove the seat from the motorcycle and position the inflated assembly on the motorcycle seat where it best matches your riding position. Unclip the attachment straps, pass the free ends under the motorcycle seat and reattach them taking care that they are not twisted. Tighten the straps using the buckle device to the point where the cushion does not slide on the seat. Do not over tighten. Re-install the seat on the motorcycle ensuring that the protective tabs and sleeves are positioned to best effect. Consider using adhesive protective film (not supplied) if the straps are in contact with paintwork.
HOW DO I ADJUST THE SEAT CUSHION TO GET THE BEST COMFORT?
Starting with bladder cells full of air, sit on the cushion in your usual riding position. Locate the valve, carefully open it to allow the air to escape slowly. Close the valve when you just start to feel contact with the motorcycle seat. Users for the most part gain greater benefit from
being able to just feel the motorcycle seat through the cushion, as the cushion needs very little air to work best.
