UK's Best Selection of Adventure Motorcycle Travel Clothing, Equipment and Accessories

Denali Electrical Can-Bus Connector For BMW, Some Ducati's & Triumphs Motorcycles

Denali D2 dual-intensity lights, complete kit (DENTT-D2) Conquer the night, grab a set of D2 LED Lights by Denali. Small and BRIGHT, with an effective beam distance of 423 feet on the low-beam sett [Read more ...]


£24.98



Product code: 101831

Manufacturers code: DENEC.02350

Brand: Denali


Denali D2 dual-intensity lights, complete kit (DENTT-D2)
Conquer the night, grab a set of D2 LED Lights by Denali. Small and BRIGHT, with an effective beam distance of 423 feet on the low-beam setting and still an incredibly small power draw!

Denali D2 Lights

The unique optic in the D2 light was designed to create a massive beam of light that is the perfect balance between distance and width. You won’t believe how much light is thrown out in front of you, and off to the sides. Consuming only 10 watts of power per lamp, the Denali D2 lights throw a blazing beam of light 423 feet down the road in front of you. That’s 3 times further than your typical motorcycle high beam.

Specs:
Pod Size: 2” round x 2.4” long
Beam Distance: 423’
Power Draw: 10 watts per lamp
Intensity: Dual
Beam Angle: 10° and 25°
Waterproof: IP-68
Mount: Universal M8
Effective Lumens: 828

Dual Intensity Technology

The Denali D2 lights are equipped with a dual intensity LED and harness to create the ideal lighting solution for on and off road riders who want an uncompromised beam of light illuminating the road in front of them. These lights are so bright, Denali developed dual intensity technology so you can use your existing hi/low beam switch to select half intensity brightness when passing oncoming. The lights can also be wired independent of your high/low beam switch to run at full intensity all the time. It’s up to you!

All Denali LED lights are housed in a rugged waterproof aluminum housing (submersible up to 3 meters underwater). Our LED’s boasts an average life span of 50,000 hours; that’s 6 years without ever being shut off!

Denali kits are easy to mount and install to your motorcycle. Every light kit includes a universal M8 mounting bracket and detailed wiring diagrams that are simple and easy to understand. Bike specific light mounts are also available for many popular bike models.

What’s in the Box:
2 x Denali D2 LED light pods
Wiring Harness with Dimmer Module, Relay and Lighted Switch
2 x M8 (8mm) mounting brackets
2 x spot driving beam lenses (10 degree beam pattern)
2 x flood beam lenses (25 degree beam pattern)
Installation instructions
Allen wrench

Denali lights come with a 2-year warranty.

Denali Lights –Conquer the night! - See more at: http://www.rg-racing.com/browsetype/denali_lights/Yamaha/TDM_850/DENTTD2/#sthash.fjmvPOwe.dpuf

Denali 194 Marker Bulb Plug-and-Play Trigger Wire Adapter (fits some BMW, Ducati, Triumph and other motorcycles) (DENEC.02350)

This adapter is designed to prevent electrical accessories from interfering with the electrical system on late model BMW, Ducati, and other European motorcycles with a Can-BUS electrical system and a "City Light" 194 marker bulb in the headlight.

Please Note: Only compatible with bikes that use a 194 marker bulb and have a "universal" bulb connector; will not fit bikes with a custom OEM 194 bulb connector or BMW R1200GS-LC with the LED Headlight.

It includes a diode for built-in reverse polarity protection. This item is designed solely to provide a "hot" trigger wire to activate a relay to power other accessories, such as driving lights, accessory fuse blocks, GPS, or other 12-volt electrical devices when the motorcycle is turned on without upsetting the motorcycle’s sensitive CAN-BUS system. This adaptor is also removable without leaving holes in the insulation of the original wiring harness, so it keeps your warranty in place even at the strictest dealers.

Installation is simple:
1. Remove the socket from the headlight housing.
2. Unplug the bulb from the socket.
3. Plug the circuit board into the socket from where you just removed the bulb.
4. Place heat shrink over the socket and circuit board and apply heat.
5. Plug the bulb into the new socket.
6. Using the lead coming from the socket, activate an external relay.

External relay not included.

We recommend the DENALI Power Hub2 (DENELC.0030000) Auxiliary Motorcycle Fuse Block (sold separately) for attaching up to 6 switched accessories to your motorcycle

The following bikes are confirmed to use Canbus electrical systems and have 194 marker bulbs. We have NOT confirmed that the 194 marker bulb connector on these bikes is a "universal" shape and is compatible with this part. Please send us photos if you’ve confirmed fit (or not fit) and we’ll update our site!

BMW
F650GS, ’08-
F800GS, ’08-
F800S*
F800ST*
HP2 Enduro
HP2 Megamoto
HP2 Sport
K1200R
K1200R Sport
K1200S
K1200GT, -’05
R1200GS
R1200GS Adventure
R1200R
R1200RT
R1200S
R1200ST
...and most other R and K series bikes 2005 and later.

Asterisks (*) used above indicate that the bike uses some CANBUS technology, but uses a standard non-CANBUS 3-wire running/brake light. Such bikes can trigger a relay or running light simply by tapping into the running light wire; no CANBUS adapter is necessary for low load applications.

 Verification Image

Reviews

No reviews were found.