DENALI CANsmart™ Controller GEN II - KTM 1290, 1190, 1090, 1050, & 790 Series DENDNL.WHS.13000
Denali didn't want to make just another accessory controll [Read more ...]
£299.99
Product code: DNL.WHS.13000
Manufacturers code: DENDNL.WHS.13000
DENALI CANsmart™ Controller GEN II - KTM 1290, 1190, 1090, 1050, & 790 Series DENDNL.WHS.13000
Denali didn't want to make just another accessory controller, they wanted to make a smarter one.
Plug-n-Play with the Denali CANsmart Controller and always be covered with the Denali 5-year warranty vs the average 2-year warranty from competitor brands!
Harness the flexibility and intelligence of your CANbus electrical system to make installation of accessories drastically easier with the DENALI CANsmart™ Controller. The CANsmart provides for plug-and-play installation of up to four electrical accessories, all controlled through your BMW's existing handlebar switches. No more "tacked on" switches or confounding wire routing. In addition, because the CANsmart controls the power distribution functions, there's no need to wire in bulky relays to control your accessories.
The CANsmart's four dedicated circuits are pre-programmed to connect to and independently control two sets of auxiliary lights, an auxiliary horn, and an auxiliary brake light. Each accessory circuit is electronically fused and ready to use right out of the box. Free software (for Mac or PC) allows you to customize these circuits, but the default settings will be right for the vast majority of installations.
It also features a "flash to pass" and "strobe when horn active" setting that will strobe the auxiliary lights when you pulse your high beam switch or sound your horn. The feature-rich brake light circuit will transform a simple two-wire brake light into a smart brake light complete with running light, multiple flash pattern, and deceleration activated braking functionality. The horn circuit enables the addition of an auxiliary horn without having to add a relay and dedicated horn wiring harness.
Want more flexibility? We thought you might. You can set any of the four circuits to Simple Circuit Mode, which will disable all custom circuit settings to provide a clean switched 12V circuit to power an accessory of your choice. The electronic fuse is the only active setting so you can properly fuse your accessory.
Features:
*NOTE:
1. The KTM 790 series motorcycles use a different ECU and are only partially supported. The turn signal, Heated gear, horn & KTM dongle functions are not available for 790 models, but controlling auxiliary lighting, brake lights and other accessories is supported. Brake light features are only triggered by the front brake for 790 models.
2. The 80 octane "Bad Fuel" feature is only available for Adventure models up to model year 2016. 3. The OEM "OFFROAD PACK" (Part No. 60600980000) is additionally required for the 1050/1090 ADVENTURE to be able to use the dongle features.
3. We recommend adding a B6 wiring extension DNL.WHS.049 if you are planning to install a B6 on the KTM 790
