UK's Best Selection of Adventure Motorcycle Travel Clothing, Equipment and Accessories

WEISER EXTREME EVO LED Indicators Dual Front & Triple Rear Combo Kit R1250GS/A 21- / R1300GS/A 23-

WEISER EXTREME EVO LED Indicators Dual Function Front & Triple Function Rear Combo Kit R1250GS/A 21- / R1300GS/A 23-

Designed specifically for: BMW R 1300GS/A from 2023 onwards (see not [Read more ...]



£439.00










Product code: EXT-EVO-DRBT-RGS1E-C

Manufacturers code: EXT-EVO-DRBT-RGS1E-CMB

Brand: Weiser Technik


WEISER EXTREME EVO LED Indicators Dual Function Front & Triple Function Rear Combo Kit R1250GS/A 21- / R1300GS/A 23-

Designed specifically for: BMW R 1300GS/A from 2023 onwards (see note below) and the BMW R 1250 GS/A from 2021 onwards.

BMW R 1300 GS/A from 2023 and R 1250 GS/A Model years 2021 – onwards EXTREME EVO range multifunction indicator kit. OSRAM Automotive LED’s power Weiser’s best ever white driving light/amber indicator front kit and new red running/brake with amber indicator rear kit. Dual function front and rear kits includes new housings and swaps out the front OEM factory fitted indicator low level amber running light for Weiser’s ultra bright driving lights/indicators; the lights are programmed to accept the Can-Bus’s existing PWM signal controlling the driving and turn functions; making installation simple.

With electronics designed specifically for & fully compatible with the 2021 – onwards BMW motorbikes. 

Note: The Extreme EVO kits are designed to replace existing mounted indicators front and rear. So, if your R1300 GS or GSA has front indicators mounted in the hand guards, some additional work and parts are required to mount the Extreme EVO indicators to the front of your GS / GSA.

 

Combined into an attractive intelligent electronic circuit board design, our front dual and rear triple function kit offers our best ever performing multifunction indicators :- 12 bright white LEDs for impressive daytime or nighttime illumination together with 12 amber LEDs for the indicators function. The rear lights contain 12 amber LEDs for indicators and 12 bright red LEDs as running lights, which offer a high intensity brake light function.

 

When the ignition is on, the driving lights are always on until you indicate. When indicating, the driving light goes out on the indicating side and flashes amber. Cancel your turn signal and the driving light comes back on. At the rear, these products work alongside your existing brake light, so you have up to three brake lights at all times for maximum conspicuity & safety. When indicating, the brake light goes out on the indicating side and the turn signal illuminates. Cancel the indicator and the brake light will come back on. The design always gives priority function to the turn signals when they are activated. Hazard lights will operate as normal.

Designed specifically for BMW R 1300 GS & GS/A from 2023 onwards (when fitted with the Enduro pack – indicators mounted under the windscreen) and the BMW R 1250 GS/A from 2021 onwards

Note: These kits are also compatible with BMW GS models 21 – onwards model year bikes supplied without the factory fitted front low level amber running lights function.
Note: R 1300 GS / GSA: You can also purchase a conversion kit from Weiser-Technik to move the indicators from the hand guards to under the windscreen.

Key Features

  • Complete high intensity LED Dual Function front driving lights/indicators and Triple Function rear running/brake lights/indicators kit
  • Automotive industry approved LEDs from OSRAM
  • Rear switchable functions between running & brake light on or just brake light alone
  • Up to 10x brighter than OEM lights
  • OSRAM LEDs come in bright, vibrant colours for maximum visibility
  • Compatible with the bikes CAN-bus motorcycle PWM signal electronics
  • Guaranteed no fault codes
  • Kits include all housings and OEM indicator cables & connectors.
  • Simple self-installation – full installation kits and directions included
  • Tech support available by phone and online
  • Installation is non-invasive no OEM wires are cut. No brackets, drilling or clamping required.
  • Increases conspicuity and safety without spoiling the look of your bike
  • 4-year warranty

Designed and manufactured in both the USA and the UK.

Front Kit – Package Includes:

  • 2 x  Dual Function LED Driving Light/Indicators
  • 2 x Weiser wires 900 mm long (Black)
  • 1 x Extension wire 900 mm long
  • 5 x zip ties
  • 1 x Posi Twist
  • 1 x Posi Tap
  • 1 x Posi Lock
  • 2 x Locking Keys
  • Installation instructions and circuit diagram

Rear Kit – Package includes:

  • 2 x Triple Function LED Running/Brake Light/Indicators
  • 2 x Weiser wires 900 mm long (Black)
  • 2 x Weiser wires 900 mm long (Grey)
  • 5 x zip ties
  • 2 x Posi Twist
  • 1 x Posi Tap
  • 1 x Posi Lock
  • 2 x Locking Keys
  • 1 x Solid State Dual electronic relay with battery termination

Technical Spec:

  • Compatible with OEM PWM (Pulse Width Modulation) signals from CAN-bus
  • 12V
  • 600 mA (each pair)
Installation Instructions
 Verification Image

Reviews

No reviews were found.