Plug N Play wiring loom for Denali or 2 wire lights with Honda switch, when the lights are on the auxillary light on the dash is illuminated, this loom is designed to work with the Denali DataDim with [Read more ...]
Plug N Play wiring loom for Denali or 2 wire lights with Honda switch, when the lights are on the auxillary light on the dash is illuminated, this loom is designed to work with the Denali DataDim with any of the Denali lights, includes connectors for the power socket. Also now works for 2 wire lights but not with Denali Datadim, you will need to order loom with pigtails from the options box!
Select add Dual USB socket & the additional extra power connector to SAE, If you already have a power socket you could use the power connector to power a GPS (it has two spade connectors)the extra lead that is an SAE connector can be used for many accessories such as a pump or a heated jacket ( if you have Denali D4 lights and a heated Jacket this may blow the fuse depending on the jacket, my Keis sleeveless body warmer is fine but the the Keis heated jacket would draw too much with D4's but would be fine with the lower current draw of the D2's)
For Denali lights you will need the DataDim as well as the light pods, without this you will blind oncoming traffic which is dangerous to both them and you.
No cutting of wires required, its plug n play
Fits all models from 2016 including the Adventure Sports
DataDim Click HERE
Denali D2 Light Pods Click HERE
Denali D4 Light Pods Click HERE
Video below will give you a good idea of the work involved and how to do it, this is just the power socket being fitted but its the same connector on the Honda Loom
